| This controller is a board with an optional LCD display and keyboard. It is designed for industrial environments; all the inputs and outputs are protected against voltage peaks. The design of the electronics and the board is such that it is compatible with the industrial EMC tests according to the EN61000-4-2, EN61000-4-3, EN61000-4-6, EN61000-4-8 and EN61000-4-9. Please note however, that external connections made for an application may induce problems which need individual attention. |
 |
Features
- Optional keyboard, as a 4 x 8 matrix (suitable for membrane keyboards).
- Optional LCD (240 x 128 dots / 32 x 16 chars, 120 x 68 mm viewing area) with CCFL (white) backlight. Other types/sizes on request.
- 32 relay drivers (100mA, 500mA peak, 12 to 24Vdc). Special protection against voltage peaks and high frequency noise is provided.
- Power: 8 .. 26Vdc (ca. 2W). Stabilisation is not required.
- 32 TTL inputs, 8 may be configured as 10bit analog input (0..5V) and 2 as PWM outputs. All lines are protected against voltage peaks.
- 64K Flash program memory.
- On-board programming through a serial port.
- 2 separate RS232 serial ports (1200..19200 baud).
- 2K Ram.
- 2K byte Eeprom for parameter storage.
- Realtime clock with 31 byte CMOS Ram on a lithium cell (not included).
- Custom and remote software update possible through RS232 port.
- Boot and upload software under Windows included.
- Drivers for the 240x128 LCD as 30x12 chars, Keyboard and I/O.
- High performance H8 controller at 16Mc; 62.5ns cycle time.
- Reliable SMD assembly.
Contact us for pricing.
|
|
Examples
